-
General Purpose Valve Series Butterfly valve series Ball valve series Hydraulic control valve series Corrosion-resistant valve series Bellows valve series Regulating valve seriesThree eccentric butterfly valve series Two-way double eccentric metal hard seal butterfly valve Soft seal butterfly valve series Other Butterfly Valve SeriesHydraulic control valve series Multi-function water control valve Elastic Seated Gate Valve On-off electric valve
- All
- Product Management
- News
- Introduction
- Enterprise outlets
- FAQ
- Enterprise Video
- Enterprise Atlas
Focus on manufacturing valve service world pipeline
Product classification
Main push recommend
For high-rise buildings, pressure reducing valves should be used on the bottom branch pipes. When installing the valve body, pay attention to the arrow direction of the valve body, if there is an auxiliary switch.
SKTEVX temperature control valve
SKTEVX temperature control valve is a kind of intelligent valve that uses thermal sensor and temperature control actuator to adjust the medium flow. The temperature control valve is usually used in the end branch of the large indoor air conditioning system. The actual temperature is transmitted to the temperature control actuator through the conduction of the thermal sensor. The temperature control actuator converts the signal into a mechanical action to adjust the opening of the valve, thereby controlling the heating The flow of the medium realizes the adjustment and control of the indoor temperature. The valve sensitivity, temperature adjustment accuracy, the use of safe and reliable.
ARVX micro exhaust valve, AVAX automatic exhaust valve
Suitable for installation in high-rise buildings, plant piping, small pumping stations to protect or improve the system of water efficiency and energy conservation.
The SKCARX composite exhaust valve body is round and oval. The internal parts of the valve include stainless steel float ball, lever and disc. The valve is installed at the outlet of the pump or in the water distribution pipeline to exclude the air collected in the pipe to improve the efficiency of the pipeline and the water pump. Once the negative pressure is generated in the pipe, the valve quickly sucks in the outside air to prevent The pipeline is damaged by negative pressure. When the tube begins to fill water, the valve flap in the open position, a large amount of exhaust, when the air is exhausted, the valve is filled with water, floating ball rises and drives the valve flap to close, stop exhaust, when the water in the tube is normally transported, if there is a small amount of air gathered in the valve to a considerable extent, the water level in the valve drops, at this time the air is discharged by a trace exhaust valve or small hole. When the water pump stops, the water in the pipe is empty or negative pressure is generated in the pipe, and the air is quickly sucked in to ensure the safety of the pipeline.
SKQB2-10 double-port exhaust (intake) valve
The double-port exhaust valve is a necessary equipment for the pipeline. It is installed at the highest point or closed place of the pipeline to remove the gas in the pipeline and dredge the pipeline to make the pipeline run normally. If the power is cut off, negative pressure will occur in the pump stop pipe, which will cause the pipeline to vibrate or rupture. The exhaust valve can inhale at any time to ensure the safety of the pipeline.
SKP1, SKB1 * type single-port exhaust (intake) valve
This product is used for the highest point on the pipeline to form a closed air place to remove the gas in the pipeline and dredge the pipeline to make the pipeline run normally during work. This exhaust valve connection has two kinds (screw thread, flange)
SKPK type quick exhaust (intake) valve
This product design is reasonable, simple structure, small size, large displacement, I plant on the basis of a large number of improvements to make KP more perfect. This product removes the gas in the pipe at the highest point of the pipe or the gas place to dredge the pipe, so that the pipe runs normally and the water output meets the design requirements. If the gas in the pipe is not installed, the water output of the pipe cannot meet the design requirements. When the pipeline is running, there will be a power outage, and the pump-off pipeline will cause negative pressure at any time, which will cause the pipeline to vibrate and rupture. The row (suction) valve will quickly inhale a large amount of air to prevent the pipeline from vibrating or rupturing and ensure the safety of the pipeline.
SKSCAP sewage composite exhaust (intake) valve
The product is used at the highest point on the head of the sewage pipe or a place with closed air to exclude the gas in the sewage pipe to dredge the pipe and make the pipe run normally. If the valve is not installed, the pipe will be closed air, which will cause the sewage flow rate to be blocked by air and even be interrupted.
SKCARX sewage composite discharge (intake) valve
Water control valve is a special valve used to control water flow, mainly including hydraulic control valves, multi-function hydraulic control valves, elastic seat seal gate valves, groove valves, etc. Water control valve has the characteristics of simple structure, convenient operation and reliable performance. It is widely used in water conservancy engineering, water treatment, irrigation and other fields, and is an important control component of water conservancy system.
National sales hotline 7*24 hours
Address: 801-805 Jingshan Road, Guannan Industrial Zone, jimei district, Xiamen City
