-
General Purpose Valve Series Butterfly valve series Ball valve series Hydraulic control valve series Corrosion-resistant valve series Bellows valve series Regulating valve seriesThree eccentric butterfly valve series Two-way double eccentric metal hard seal butterfly valve Soft seal butterfly valve series Other Butterfly Valve SeriesHydraulic control valve series Multi-function water control valve Elastic Seated Gate Valve On-off electric valve
- All
- Product Management
- News
- Introduction
- Enterprise outlets
- FAQ
- Enterprise Video
- Enterprise Atlas
Share:
JSQD401 electric three-way O-valve
If you are interested in our products, Please contact us
Product classification
Key words:
Product Details
JSQD401
Electric three-way O-valve
Pneumatic Rotary Stroke Regulating Valve
Product overview
JSQD401L/T type electric three-way O-valve (referred to as three-way ball valve) is a rotary regulator, which is the executive unit in the combined instrument of the electric unit. Three way ball valve body flow resistance is small, flow coefficient is large. The ball core has L-type T-type two, used to distribute fluid or split flow occasions. The three-way ball valve is equipped with a small, strong and high-level actuator that receives ON-OFF action. It is flexible in action and adopts direct indication and feedback of rotation angle. It is widely used in the transformation, confluence or diversion of medium flow direction in gas, steam and liquid transportation pipelines in petroleum, chemical industry, papermaking, metallurgy, sewage treatment and other production departments, so as to achieve the production process according to certain specifications.
Standard technical parameters
Valve body
Form: split peer group photo ball valve
Valve size: DN15-300mm 1 "~ 12"
Rated pressure: PN10, PN16, PN40 ANSI 150 300
Connection form: ANSIGB JB HG JPI JIS DIN
Welding (to be specified by user)
Flange standard: ANSI GB JB HG JPI JIS DIN
Sealing surface type: RF RJ FF RM flange connection
Flange end face distance: as GB12221-89
Material: WCB WC6 WC9 CF3 CF8 CF3M CF8M
Inner parts material: WCB 304 316 304L 316L 17-4PH
Structure: according to the spool structure
L type T type
According to the sealing ring material
Enhanced soft sealing of polytetrafluoroethylene
(-20 ℃ ~ 180 ℃)
para-polystyrene seal
(-20 ℃ ~ 300 ℃)
Metal Pile Stele Alloy Hard Seal
(-40 ℃ ~ 450 ℃)
Gap form: pressing plate type
Packing: V-type PTFE packing, flexible graphite packing
Gasket: form, tooth type and peace type
Material, F4/Modified F4, Stainless Steel Graphite
Intra-Valve Components
Spool: cylindrical through-hole sphere (control mode is shown in the figure)
Distribution fluid type L
Distribution Fluid Type T
Seal drawing: spherical sealing surface (2 or 4)
Material: soft seal
Reinforced poly tetragas ethylene para-polystyrene
Hard seal metal surfacing Steele alloy
implementing agency
Form: Electric actuator (UNIC/DTR series)
UNIC/DTR-05/10/20/40/60/100/150
Valve role: positive role, reaction
Control action: ON-OFF control
Power supply: AC 100,200,220V,50/60Hz
Angle: 90 °
Power consumption: 8/20/30/90/90/100/100W
absolute heald resistance: 100M2(500VDC)
Withstand voltage: 1500VAC1 min
Housing Material: Aluminum Die Casting
Enclosure protection: IP55
Motor protection: overheat protector (automatic recovery type)
Wiring interface: PF1/2 × 2 plastic waterproof connector
Ambient temperature:-20 ℃ ~ 55 ℃
Ambient humidity: 10 ~ 90% RH
Manual device: detachable wrench
Accessories (configure as needed)
Opening detection potentiometer, limit switch, overload protector R small converter 4-20mADC output, dehumidification heater.
Performance
Rating: refer to Table 1
Seat leakage rate (% for rating):
Metal seal less than 0.01% or 0.001% (ANSI B16.104-1976IV)
Soft seal less than 0.00001% (ANSI B16.104-1976IV)
Action time: refer to Table 1
Overall dimension: refer to Table 2
Product weight: refer to Table 2
Paint color: the surface of the electric actuator and valve of the regulating valve should be painted, and the stainless steel and copper valves can not be painted. The arrows and characters on the body shall be painted with red paint.
User-specified colors are also available.
Note: 1. The sensor in the table is a standard configuration and can be equipped with different actuators.
Note:
1. The data not indicated in the table is based on PN16.
2. The valve body flange and flange end face distance can be manufactured according to user-specified standards, such as ANSI,JIS,DIN and other standards.
Get Quote
Related Products
National sales hotline 7*24 hours
Address: 801-805 Jingshan Road, Guannan Industrial Zone, jimei district, Xiamen City
