-
General Purpose Valve Series Butterfly valve series Ball valve series Hydraulic control valve series Corrosion-resistant valve series Bellows valve series Regulating valve seriesThree eccentric butterfly valve series Two-way double eccentric metal hard seal butterfly valve Soft seal butterfly valve series Other Butterfly Valve SeriesHydraulic control valve series Multi-function water control valve Elastic Seated Gate Valve On-off electric valve
- All
- Product Management
- News
- Introduction
- Enterprise outlets
- FAQ
- Enterprise Video
- Enterprise Atlas
SMAK
Key words:
ARVX micro exhaust valve, AVAX automatic exhaust valve
Suitable for installation in high-rise buildings, plant piping, small pumping stations to protect or improve the system of water efficiency and energy conservation.
Key words:
The SKCARX composite exhaust valve body is round and oval. The internal parts of the valve include stainless steel float ball, lever and disc. The valve is installed at the outlet of the pump or in the water distribution pipeline to exclude the air collected in the pipe to improve the efficiency of the pipeline and the water pump. Once the negative pressure is generated in the pipe, the valve quickly sucks in the outside air to prevent The pipeline is damaged by negative pressure. When the tube begins to fill water, the valve flap in the open position, a large amount of exhaust, when the air is exhausted, the valve is filled with water, floating ball rises and drives the valve flap to close, stop exhaust, when the water in the tube is normally transported, if there is a small amount of air gathered in the valve to a considerable extent, the water level in the valve drops, at this time the air is discharged by a trace exhaust valve or small hole. When the water pump stops, the water in the pipe is empty or negative pressure is generated in the pipe, and the air is quickly sucked in to ensure the safety of the pipeline.
Key words:
SKQB2-10 double-port exhaust (intake) valve
The double-port exhaust valve is a necessary equipment for the pipeline. It is installed at the highest point or closed place of the pipeline to remove the gas in the pipeline and dredge the pipeline to make the pipeline run normally. If the power is cut off, negative pressure will occur in the pump stop pipe, which will cause the pipeline to vibrate or rupture. The exhaust valve can inhale at any time to ensure the safety of the pipeline.
Key words:
SKP1, SKB1 * type single-port exhaust (intake) valve
This product is used for the highest point on the pipeline to form a closed air place to remove the gas in the pipeline and dredge the pipeline to make the pipeline run normally during work. This exhaust valve connection has two kinds (screw thread, flange)
Key words:
Latest Products
Latest News
National sales hotline 7*24 hours
Address: 801-805 Jingshan Road, Guannan Industrial Zone, jimei district, Xiamen City
